Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.
STILL OPEN - SHIPPING DAILY!
AS LOW AS 0% FINANCING BUILD NOW

2011 Ford F-150
Anthem Off-Road Intimidator 18x9 18
Nitto Ridge Grappler 285/70
Rough Country Leveling Kit


Anthem Off-Road Intimidator 18x9 18

Wheels
Anthem Off-Road Intimidator - Black
Front: 18x9
Offset: 18
Backspacing: 5.7
Stance: Aggressive > 1" outside fender
Rear: 18x9
Offset: 18
Backspacing: 5.7
Stance: Aggressive > 1" outside fender
Tires
Nitto Ridge Grappler
285/70
33.7"x11.2"
285/70
33.7"x11.2"
Details
Suspension: Leveling Kit

Suspension Brand: Rough Country

Suspension Details: 2" puck from Rough Country, They claim it will fit 33x12.50 on their website. Note* the Ford Factory offset on the stock wheels is +44mm took me a while to figure that out. The Nitto Ridge Grappler 285/70/R18 measures between 33.5" and 33.9" in height with approx .5" to spare at full wheel tilt with no rubbing or cutting necessary. This should be true for all 11-14s 4WD.

Rubbing: No rubbing or scrubbing

Trimming: No trimming

Trimming Details: No trimming rubbing or scrubbing

Front Wheel Spacers: None

Rear Wheel Spacers: None

Add to Favorites Add My Ride Edit My Ride Similar Offsets Gallery

Do 18x9 18 wheels with 285/70 tires fit on a 2011 Ford F-150 4WD Rough Country Leveling Kit?

Yes they do! This 2011 Ford F-150 4WD is running Anthem Off-Road Intimidator 18x9 18 wheels Nitto Ridge Grappler 285/70 tires with Rough Country Leveling Kit suspension, needs No trimming and has No rubbing or scrubbing. As you can see from the pics this wheel and tire combo can be done!** With this year/make/model, the stance is Aggressive > 1" outside fender. Also remember spacers impact fitment, this ride is running None in front and None in rear.

** We always recommend finding a couple vehicles that have achieved this fitment, as this information is solely based on the owner of this vehicle. Although we review every gallery page, there are so many variables we cannot verify every fitment is possible or accurate. However, if all the other kids are doing it, IT MUST FIT!!

Related Videos


All gallery pages and information are added by the owners, or representatives of the owners of the vehicles. Custom Offsets LLC is not responsible or liable for the information posted on this site. Use at your own risk and always find multiple sources to confirm your wheel, tire, and suspension kit buying decision. 1 views.

Start your own build using this gallery ad's wheel, tire, and suspension setup. Please follow the steps below to begin your build.

Steps

  1. Select your wheels.
  2. Add tires.
  3. Add suspension.

Note: The wheel, tire, and suspension filters will be preset to match this gallery ad.