Outdated browser detected Unfortunately we do not support Internet Explorer. We recommend that you use Google Chrome, Mozilla Firefox, or Microsoft Edge.
Carli Suspension Dodge 3\

Home / Brands / Suspension Brands / Carli Suspension / Suspension Lifts / Carli Suspension Dodge 3" Leveling Commuter System (2010-13 2500 4WD & 2010-12 3500 4WD | Diesel) /

Carli Suspension Dodge 3" Leveling Commuter System (2010-13 2500 4WD & 2010-12 3500 4WD | Diesel)


Free shipping to the lower 48

Financing Available

All Carli Suspension products are experiencing 8-12 weeks delayed shipping. Additional delays are possible.

Part Number



In Short: The Commuter 2.0 system is designed for people seeking the best on-road ride quality on a budget. Utilizing front and rear Fox 2.0" internal reservoir shocks, we've developed a Carli Signature shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, and towing/hauling. The Fox 2.0s are fully rebuildable, built with hour-glass bushings and boast extruded aluminum construction with a clear anodizing for corrosion resistance. Fox builds these shocks with their legendary red shock oil that flows well down to -55* F.

The Details: Your truck will sit 2.5"-3" higher in the front (year/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1" via Carli's progressive add-a-pack. The Progressive Add-A-Pack replaces the factory overload with a 5-Leaf, progressive pack that changes the final rate of the spring pack keeping the rear planted while increasing traction and predictability.

When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options (unless 1994-2002, then there's only one); extended, Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with 1/2" FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement points. Factory pillow-bushings are re-used to assemble the sway bar to the lengthened link. Carli's optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8" FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension (in close competition with the full progressive leaf spring upgrade).

When lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver's side 3/4" and back toward the cab 1/2". This system includes an Adjustable Track Bar to push the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application. We also recommend the purchase of a set of extended control arms to shift the axle forward to its new center of travel.

Wheel and Tire: This system will fit up to a 35" tire with stock control arms (we recommend purchasing our extended, Mild Steel Control Arms) on wheels with 5.75-6" of backspacing. If running factory wheels, we recommend an All Terrain 35" tire to avoid rubbing. For 37" tire fitment, our High-Clearance Control Arms and Adjustable Track Bar can be paired to a wheel with 5.75" of Backspacing. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.

What's Included

  • CS-DLRC-10-D: Linear-Rate Coils
  • CS-DC20SPKG-03-D: Carli Tuned Fox 2.0" IFP Shocks, Front and Rear, Shock Tower Spacer
  • CS-DATB-03: Track Bar


2010 Dodge Ram 2500 Laramie 4WD
2010 Dodge Ram 2500 SLT 4WD
2010 Dodge Ram 2500 ST 4WD
2010 Dodge Ram 2500 SXT 4WD
2010 Dodge Ram 3500 Laramie 4WD
2010 Dodge Ram 3500 SLT 4WD
2010 Dodge Ram 3500 ST 4WD
2010 Dodge Ram 3500 SXT 4WD
2013 Ram 2500 Big Horn 4WD
2013 Ram 2500 Laramie 4WD
2013 Ram 2500 Laramie Longhorn 4WD
2013 Ram 2500 Lone Star 4WD
2013 Ram 2500 Outdoorsman 4WD
2013 Ram 2500 SLT 4WD
2013 Ram 2500 ST 4WD
2013 Ram 2500 Tradesman 4WD
2012 Ram 2500 Laramie 4WD
2012 Ram 2500 Laramie Longhorn 4WD
2012 Ram 2500 Outdoorsman 4WD
2012 Ram 2500 SLT 4WD
2012 Ram 2500 ST 4WD
2011 Ram 2500 Laramie 4WD
2011 Ram 2500 Laramie Longhorn 4WD
2011 Ram 2500 SLT 4WD
2011 Ram 2500 ST 4WD
2012 Ram 3500 Laramie 4WD
2012 Ram 3500 Laramie Longhorn 4WD
2012 Ram 3500 SLT 4WD
2012 Ram 3500 ST 4WD
2011 Ram 3500 Laramie 4WD
2011 Ram 3500 Laramie Longhorn 4WD
2011 Ram 3500 SLT 4WD
2011 Ram 3500 ST 4WD

About Us
We are dedicated to helping you find the perfect fitment for your ride while also bringing you the highest quality, affordable aftermarket parts in the world! We are truck and car enthusiasts who build their dream rides with these very products.

Shipping times vary depending on item and immediate availability. Many suspension kits will ship out within 3-5 business days while some select items may take up to 7-10 business days. You will receive the tracking information via email as soon as it is available so you can easily track your package(s) from us, to your door. Keep in mind, some suspension components may ship separately and could arrive at different times. All shipping prices are based on the lower 48 states unless specified otherwise. Always inspect your items immediately upon receipt and notify us within 5 business days if there are any concerns, damages, or missing items.

WARNING: This product can expose you to Nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to p65warnings.ca.gov.

Sign up to be notified when item is back in stock

Enter your email here and we'll let you know when this is in stock again